Electronic material sample die cutting machine

Electronic material sample die cutting machine
http://www.cutcnccam.com/article-show-201111281123287.shtml

Materials which electronic material sample die cutting machine can cut: PVC, PET, PET, PP, PS, PE, protective film, 3M, PORON,FPC flexible plate; label, membrane switch, masking tape; and double-sided tape, reflective backlight material, key membrane switch, BEF, reflective film, flexible circuit, optical products, adhesive products, dust-proof net, foam, thermal materials, insulation materials, copper foil, platinum and aluminum foil , 2 mm precision die-cutting materials for phone, computer, TV, electrical equipment,etc.

Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/

Advantages of carton paper box cnc cutting machine

Advantages of carton paper box cnc cutting machine

http://www.cutcnccam.com/article-show-201111281121131.shtml
CUTCNC carton paper box cnc cutting machine is mainly for short run sample production of carton paper box. For any dissatisfaction, the box design can be modified at any time. Large volume production is made until sample production is confirmed by customers. It greatly helps reduce production waste and gets more orders for factory.

Totally replacing manual design and proofing, CUTCNC carton paper box cnc cutting machine make product design more scientific and standard. CUTCNC carton paper box cnc cutting machine reduce carton paper box design time for designers to get out of tedious manual job and have more energy to develop new carton paper box products.
Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/

The requirements of green packaging

The requirements of green packaging

http://www.cutcnccam.com/article-show-2011121598541.shtml

The requirements for green paper packaging
Can be reused or recycled biodegradable;
Surface does not allow wax, oil;
Moisture-proof plastic coating materials is not allowed;
Cartons should be taken adhesive connection method does not allow compliance with the flat wire nails;
Cartons must be made water-soluble marker, does not allow oil-soluble ink.
The requirements of green plastic packaging :
Use of packaging materials should be reused, recycled or biodegradable.
In the protection of the contents intact under the premise of a single material as the material.
The use of PVC products, the monomer content should meet the requirements of GB9681.
Use of polystyrene resin or molding shall conform to national standards.
Containing HCFCs are not allowed (CFS) of expanded polystyrene (EPS), polyurethane (PUR) and other products.
Printed on the packaging logo ink or adhesive labeling should be non-toxic, and should not direct contact with food.
Can be reused or recycled packaging, handling and use of its waste by GB/T16716 regulations. Other requirements include: Packing, marking and labeling, storage and transport, detailed requirements and standards.

Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/

Bobst Folder/Gluer Brings New Business

Bobst Folder/Gluer Brings New Business

http://www.cutcnccam.com/article-show-20111210856434.shtml

Printed Specialties Corp. has installed a Bobst Expertfold 110-A2 high-speed folder/gluer for additional capacity and to improve efficiency. President Greg Smith says, “We had a job that took two folding operations. Our customer was concerned about our capacity and turnaround time. The Expertfold has allowed us to take that job from two operations to a single folding operation and run it faster. As a result, we've increased our share of the customer's business from about 10 percent to nearly 70 percent.”

The folder/gluer is capable of running straight line and crash-lock cartons, presentation folders, CD/DVD sleeves, and other solid carton and/or microflute corrugated products at speeds to 1,476 fpm.

Printed Specialities also improved die-cutting operations with the installation of a Bobst SP 103-ER Autoplaten machine. “The die-cutter gave us additional capacity, but with inline blanking, it allows us to eliminate manual blanking on many jobs, providing a quality and efficiency benefit for us and our customers.”
CUTCNC offer printing products sample
cutting machine, to make the sample of printing products.
Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/


cutting machine

cutting table

sample maker

how to make-up more conducive to the print ink?

how to make-up more conducive to the print ink?
http://www.cutcnccam.com/article-show-2011121085608.shtml
Should be avoided in the field, in part or in the middle of the darkened part of the drum rotation direction along the long, slender gap skylights, should be as much as possible on a small rectangular graphic layout along the front and rear direction of the display. As the string of press ink capacity is limited, along the direction of rotation of the printing cylinder slender skylights, roof after the printing ink will become the upper and lower ends of the deep, seriously affect the appearance of printed materials. If the roof is not finished within the shape, it could be considered up to and surrounding the same or similar network or field, or possible to put the entire pattern rotated by 90 °. The same cross-make-up, the phase where there is often a blank part of the elongated shape, the blank for this part, should try to use the same proportion with the surrounding network or field to fill.

Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/


cutting machine

cutting table

sample maker

Guangdong International Packaging and Printing City

Guangdong International Packaging and Printing City


http://www.cutcnccam.com/article-show-2011128953557.shtml
Total investment of 400 million yuan, about100,000 square meters of the Guangdong International Printing and Printing City will be completed and it is opened in June this year.
Hundreds printing industry representatives from all over the packaging and printing industry representatives gathered in the city, signed the rent contract. Guangdong Printing Association official said the project is completed, the province will have a radiation packaging sector as well as the entire Pearl River Delta in southern China's real "one-stop" platform for trade and logistics services.
The packaging industry developed rapidly in Guangdong, it is 1/3 of the country's total output value of packaging industry. However, printing and packaging services for the industry materials, machinery and market a considerable lag, need a large, fully functional, brand brings together the professional market. Guangdong International Packaging and Printing City backdrop.
Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/


cutting machine

cutting table

sample maker

Package Design: Make an Impact

http://www.cutcnccam.com/article-show-2011128953557.shtml

Package Design: Make an Impact
Pity the poor package designers. Their task is formidable: Create a package that appeals to consumers; is easy to open, yet tamper-resistant; meets all the necessary requirements to protect its contents; then completes its lifecycle with no ill effects to the planet. Whew!

Sustainable, biodegradable paperboard packaging for Artisan Botanical Perfume makes a splash in the health and beauty market.
Clearly, this kind of project requires collaboration throughout the process. But when great minds come together, look what can be done.
Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/

Pre-press pattern making

Pre-press pattern making

http://www.cutcnccam.com/article-show-2011128954393.shtml
Pre-press pattern making is very important process of pre-press plate-making. Pattern making can check the quality of the preceding production processes, while sample is the standard for color tracking of the mass production . Therefore, samples play a role of connecting the plate, it is the important part of company's quality management.


There are many factors affecting the quality of samples, for example: make-up, copy, imaging, ink, wipe the water, field density, dot gain, proofer care and maintenance, environmental temperature and humidity and so on. No matter which of these factors problems for final proofing will have a huge impact on the results. Therefore, only the standardized data of the management and operation to the proofing process, to copy and restore the network to meet the requirements, and provide for high volume printing sheets qualified to recover everything.

CUTCNC offer printing sample
cutting machine, to cut the sample of printing products.
Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/

cutting machine

cutting table

sample maker

The principle of offset printing

The principle of offset printing

http://www.cutcnccam.com/article-show-201112794940.shtml
The diagram shows the basic offset litho printing process. Ink is transferred from the lithographic surface to an intermediate rubber surface and then to paper. The rubber transfer cylinder runs in contact with the printing-plate cylinder and receives the inked image from it; this image is then offset onto the paper. The rubber cylinder keeps the delicate printing plate from coming in contact with the printed object. Very long printing runs, or periods when the plates are not changed, are thereby made possible, and the faithfulness of reproduction and sensitive shading, unique to lithography, are preserved. The rubber intermediate, called a blanket, can transfer ink to paper and to a wide variety of materials that cannot be printed directly, including plastics and metals. Because the soft blanket conforms to the texture of the surface to be printed, lithographic image quality is unrivalled.
CUTCNC offer offset printing blanket cutting machine to cut the offset blanket, our machine can cut it with high speed and high precision, can make the save mach labor and material.

Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/

Four-color offset press is popular in the market

Four-color offset press is popular in the market

http://www.cutcnccam.com/article-show-201112794695.shtml

In the exhibition the Chinese manufacture mainy display single color offset press, or two color offset press. The four-color offset press market mainly produced by foreign manufacturers.
The this all print exhibition almost all display the four-color offset press, from octavo to quarto four-color, four-color and full-off four-color, and some manufacturers have introduced a five-color machine. Traditional single or two-color offset press exhibited significantly reduced the proportion of users of four-color machine is much higher than expectations for a single, two-color machine's expectations. It reflects the manufacturer, each manufacturer of four-color machine orders are routed to almost three months after the end of the year and some even have been discharged. Four-color machine greatly blue dark years of market development with the.
Over the past few decades, China's market, mainly in single or two-color printing machine in the main lot off when they purchase a single, two-color machine, they have accumulated through years of a certain capital, just to buy the strength of the domestic four-color machine this is also optimistic about the domestic market, four-color machine the main reason.
CUTCNC offer offset blanket cutting machine to cut the blanket automatically, can save much labor and have high precision, help the development of four-color offset press.

Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000



www.cutcnccam.com



www.cutter-plotter.com



http://www.ad-engraving-machine.com/



http://www.cutcnccam.org/



http://www.cuttingmachine-cuttingmachine.com/

Green printing

Green printing
http://www.cutcnccam.com/article-show-201112599228.shtml
Green printing is not a short fashion, but a inevitable. Environmentally friendly green printing combine the moral responsibility and economic advantages into one. For example is a full set of environmental protection equipment to carry Speedmaster XL105-6 + L with a standard configuration of the Speedmaster XL105 compared to annual savings of € 210,000 in operating costs.

Whether it is the "green IT", hybrid locomotives, or organic food, green products are to conquer the entire market. Heidelberg is actively promoting this process. Since 1992, the company protecting the environment has become a formal target. Meanwhile, with the green printing solutions increasingly broad scope of its global sales increased year by year. Printing more and more aware of environmental protection investment can bring them profit. On the one hand, will be more stringent environmental regulations; the other hand, eco-friendly printing customers need printed, in part, out of consideration to actively improve the corporate image, and so more and more customers. For most especially active in the international market, printing companies, even if the business report labeled "climate-friendly", or use by the Forest Stewardship Council certified paper and other institution, they to solve the problem either. There is no doubt, to provide environmentally friendly printing solutions, has obvious advantages, but these advantages will continue to expand.

CUTCNC offer green printing sample cutting machine, make our efferts to make the world more green.

Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000



www.cutcnccam.com



www.cutter-plotter.com



http://www.ad-engraving-machine.com/



http://www.cutcnccam.org/



http://www.cuttingmachine-cuttingmachine.com/

The paper use for printing

The paper use for printing

http://www.cutcnccam.com/article-show-201112598435.shtml
Coated paper
Use paint, adhesives and coatings auxiliary materials, use the special equipment in cardboard surface coated, dried, pressed on paper to form a layer of light after the smooth, dense coating to obtain good surface properties and printability of coated paper . Used for cigarette, labels, cartons, etc.

Offset Paper
Mainly one-sided offset paper. White glossy paper, but the whiteness, tightness, smoothness than coated paper. The offset paper super calendar, it's smoothness, tightness of pressure than normal light offset paper is good, the printed text, graphics and yellow after wall paper into paperboard cartons.

Label paper
Business white paper, printed in good, used to make trademark sign.

Kraft paper
Including cardboard, paper, cement bags, high-strength corrugated, brown cardboard. Kraft softwood kraft is the texture of the paste made of tough, high strength, high-strength paper was brown wrapping paper, from the appearance of light can be divided into single-sided, double-sided light, with stripes, no stripes, etc. variety, quality requirements are slightly different. Mainly for the production of small brown paper bags, paper bags, and industrial products, textile, daily necessities within the packaging. Kraft paper is divided into U, A, B3 grades.

Corrugated paper
Corrugated in the production process has been pressed into corrugated shape, made of corrugated cardboard since it will provide flexible, flat crush strength, and impact of vertical compression strength and other properties. Corrugated cardboard, paper formation, thickness to be consistent, can not have wrinkles, cracks and holes and other paper disease, or failure to increase production of decapitation, affect product quality.

CUTCNC
cutting machine can be used to cut all the material use to make the printing.
Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000



www.cutcnccam.com



www.cutter-plotter.com



http://www.ad-engraving-machine.com/



http://www.cutcnccam.org/



http://www.cuttingmachine-cuttingmachine.com/

Doyen Opens Development Center

Doyen Opens Development Center

http://www.cutcnccam.com/article-show-2011123922493.shtml
Doyen Medipharm has set up a dedicated converting process development area to assist transdermal and wound care manufacturers in establishing the best converting process for their products. The area is suited to maintain customer confidentiality.

Doyen's custom test rig can be used to evaluate folding, laminating, and die-cutting capabilities of delicate, stretchy, adhesive, or non-adhesive materials. Says Alastair Fleming, VP manufacturing operations, “Four side seal packaging material trials in cooperation with film, foil, and paper suppliers have always been good practice for Doyen, and our process development support is a natural extension of this popular and proven service.

Sample cutter

Sample cutter

http://www.cutcnccam.com/article-show-201111121721271.shtml

CUTCNC Sample cutter cutting machine are designed to precisely cut samples of various materials such as cardboard, paper, plastic, vinyl, foam core, gasket, sticker, etc. with max. thickness of 15mm.

Sample cutters cutting machine with several kinds high quality blades ensures a precision cut. The dimension of 3500*2000mm sample cutter is the largest cutting table.

With high precision and stability, CUTCNC sample cutters cutting table
are approved by market.

Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000



www.cutcnccam.com



www.cutter-plotter.com



http://www.ad-engraving-machine.com/



http://www.cutcnccam.org/



http://www.cuttingmachine-cuttingmachine.com/

Why your sample cutting machine need 48 hour aging process

http://www.cutcnccam.com/article-show-201111261437590.shtml
Why your sample cutting machine need 48 hour aging process

Whether it is sample maker, pattern making, mat board cutting machine and light box engraving machine, CUTCNC offer 48 hour aging process to them all.

The aim is increasing the device resistance of various shocks during transport. And CUTCNC is the ISO9000 quality management system certification enterprises, ISO9000 quality management system with clear requirements and regulations, all sample maker,pattern making, mat board cutting machine and light box engraving machine in the factory must be aging 48 hours? This can protect the cutting machine, card machine, rings and other small prototype machine stability, but also can ensure the the stability of all the machine and the security in the maritime, so that after installation of the table will be more stability and more security.
Email: sales02@cutcnccam.com

MSN: trinityhu@hotmail.com

Skype:trinityhu

ICQ:627696000



www.cutcnccam.com



www.cutter-plotter.com



http://www.ad-engraving-machine.com/



http://www.cutcnccam.org/



http://www.cuttingmachine-cuttingmachine.com/

pattern making cutting machine

Key technology of CUTCNC pattern making cutting machine

http://www.cutcnccam.com/article-show-201111211015495.shtml
Key technology of CUTCNC pattern making cutting machine is a comprehensive technology of mechanical and electronic integration.

For pattern making cutting machine, precision of machine and CNC system will directly affect the efficiency and quality of blade cutting. For cutting high precision or thick components, the following key technologies must be well mastered.

Carton pattern cutting machine

Carton pattern cutting machine
http://www.cutcnccam.com/article-show-20111171653396.shtml
Carton pattern cutting machine used as paper box CNC cutting table, can cut corrugated paper, grey board paper , and mainly other materials to make package sample, box proof.
Application of carton pattern cutting machine:
Carton pattern cutting machine
quickly after importing CAD design. Using vibrating blade to cut corrugated and KT advertising material, using drag knife to cut card board, grey board, PVC material. Making perfect sample, ensure sample accuracy. Carton pattern cutting machine will be a powerful tool for your factory to get large orders from the customer.
1. Carton pattern cutting table can cut many different materials (such as corrugated paper, card paper, offset paper, grey board to make carton samples.
2. Carton pattern cutting machine can fold corrugated paper, card paper and offset board into perfect folding line.
3. Carton pattern cutting table can half cut, whole cut, crease and dotted line.
4. Carton pattern cutter plotter use laser lamp improve location precision
5. Carton pattern cutting machine has four tools（oscillating knife, drag knife, pen and creasing wheel）with safety guard device.

Email: sales02@cutcnccam.com
MSN: trinityhu@hotmail.com
Skype:trinityhu
ICQ:627696000

www.cutcnccam.com

www.cutter-plotter.com

http://www.ad-engraving-machine.com/

http://www.cutcnccam.org/

http://www.cuttingmachine-cuttingmachine.com/

carton box pattern cutting table

carton box pattern cutting table
http://www.cutcnccam.com/article-show-20111111142161.shtml
In addition, a further study showed that elderly people, who now account for a much larger proportion of consumers, found carton box much easier to recognize, open and use than other forms of packaging. Carton box project quality and consumers then tend to relate this to the product so giving carton packed products a better chance of success.
CUTCNC offer carton box pattern cutting machine can make the carton pattern cut at one time after import the design into the cutting table. Can cut many different materials (such as corrugated paper card paper, offset paper, grey board, compound materials, gasket, leather and textile)
Can fold corrugated paper, card paper and offset board into perfect folding line.

computer cutting machine

computer cutting machine
http://www.cutcnccam.com/article-show-20111191058114.shtml
a computer cutting machine used for cutting out parts of articles from layers of cloth card webs or knitted fabric. The technically possible depth of cutting of the layer depends on the design of the cutting machine and on the thickness and properties of the fabrics. computer cutting machine may be movable or stationary.

Cutcnc offer pattern computer cutting machine , can cut the samples of package, advertising, garments. our cutting machine can cut the paper pattern after import the design into the cutting table.
Email: sales02@cutcnccam.com
MSN: trinityhu@hotmail.com
Skype:trinityhu
ICQ:627696000
www.cutcnccam.com
www.cutter-plotter.com
http://www.ad-engraving-machine.com/
http://www.cutcnccam.org/
http://www.cuttingmachine-cuttingmachine.com/

laether cutting machine

leather cutting table
http://www.cutcnccam.com/article-show-2011115105103.shtml
CUTCNC leather cutting machine is self-develop machine in China. It's widely applied in footwear making, handbag cutting and other leather goods production enterprises.

Best solution cutting machine for sample cutting and small bulk production. leather cutting machine aims at solving the problem of small order with diverse styles and short lead time that the shoe factories are faced with, thus meets the ever-changing consumption demand, helping the enterprise seize the business opportunity and increase their competitiveness.